Product DescriptionSince it shows good adhesion to a wide range of materials, from various metals, plastics, rubber, and ceramics, there is no need to use different adhesives.
[Features]
○Adhesive adhesion: It starts to harden when it comes into contact with moisture in the air, and after application, it reaches the adhesive area in about 10 minutes, so if you stick it at this point, it can be fixed instantly and there is no need for temporary fixing.
○One-component, solvent-free, room temperature fast curing: One-component, solvent-free, fast curing adhesive that is easy to work with, safe, and clean.
○Wide range of adhesion: Since it shows good adhesion to a wide range of materials, from various metals, various plastics, rubber, and ceramics, there is no need to use different adhesives.
○Durability: As an elastic adhesive, it has both "toughness and flexibility", so it follows the movement caused by the expansion and contraction of the adherend, and has excellent durability from low temperatures (-60℃) to high temperatures (120℃).
・The adhesive layer absorbs shock. Elastic adhesive that is difficult to peel off.
・Resistant to heat and water. Can be used outdoors, suitable for temperatures between -40℃ and 120℃. *Not suitable for submersion
-Can be used on uneven surfaces. No solvent is used, so no shrinkage.
-Can be used on vertical surfaces. Less dripping, no need for temporary fastening if light. *Temporary fastening for nameplates, etc.
-Solvent-free type with little unpleasant odor.
Uses:
-Adhering nameplates and plates, bonding polystyrene foam and soft PVC sheets, bonding stainless steel to concrete surfaces
-Adhering plastic accessories to PVC leather, making accessories, repairing bags and shoes
How to use
1. Remove dirt, rust, oil, etc. from the surface to be bonded with sandpaper or alcohol, and dry thoroughly. Sand rubber and leather thoroughly.
2. Use the thin coating side of the spatula provided to apply a thin and even coat to both sides to be bonded.
3. Leave for about 5 to 10 minutes.
4. As soon as it becomes sticky like adhesive tape, stick the pieces together and press firmly. If necessary, secure it with adhesive tape or string.